LED and light control provide big savings with towering electricity prices

-By replacing conventional light sources with durable LED solutions from RN Solutions, you will achieve a significant reduction in energy consumption. If you also choose to connect a lighting control from NewRoniX, you can further reduce power consumption by 50 to 80 percent, explains Anna Charlotta Lindström Nielsen, sales and marketing director at RN Solutions.

And with electricity prices of DKK 3-4, which may increase further during the coming winter, there are big savings to be had, because you can turn down a light fitting from 22 Watts to 11 Watts, so it can be quickly seen on the electricity meter.

The savings are achieved by using RN Solutions' lighting control to adapt the light to the actual conditions, so that the animals are always in the optimal lighting. The light control can measure real-time light, and this is a big difference from, for example, if you had a light sensor on the gable that makes the light either switch on or off.

Your big advantage is that once the light control is installed, you don't have to touch it any more - it runs itself. And you don't actually notice whether the light is switched off or whether it is switched on. You can define yourself via your phone that you must always have 120 lux at certain points, and then the light control will constantly regulate the light, regardless of whether light is coming in from outside. If a cloud suddenly appears in front of the sun, it will constantly regulate the light so that there is always, for example, 120 lux. So the barn only uses exactly the amount of power it needs to maintain an even light level for your animals.

If you choose a lighting solution with lighting control from RN Solutions, we will pre-program the system against the backdrop of the stable's layout, so that the light is individually adapted to the individual departments. Our products are made for the individual barn with thorough instructions on how to install lights and light control in the barn. And when the individual components have been set up, the user basically just needs to scan a QR code with their phone to start the smart lighting.